Fabrication has taken place for various aluminium fascia and soffit panels. The team cut the sheets to the correct size. After that the parts are folded on the CNC press brake. In addition welding takes place on the remaining panels. Powder coating will finish the panels. The team will deliver these to site and install…(Read More)
Sports Bar Steel SWP were asked to fabricated and install steel work for a revamping of a holiday park. The steel was left bare to give an industrial feel. Various elements were fabricated including a pergola, curved staircase, bar racking and railings…(Read More)
Refurbish-able Elbow The TIG has produced a square to round stainless steel refurbish-able elbow. This allows grain to flow more efficiently through the elbow. Moreover the wear on the steel will be less compared with a fully round tube. The outer walls can be removed and refurbished easily. The TIG produced the various…(Read More)
Stainless Steel Chute The TIG has completed a stainless steel potato chute. The fabrication stage saw components cut to the correct shape and size. Following on from this The TIG welded the chute together. A wash plate was also produced to accompany the chute.  …(Read More)
Hydraulic Ram Brackets Our engineer cuts steel lugs from 15mm plate on the CNC plasma cutter. Next the machinist drilled out the lugs to 30.5mm using the radial arm drill. After the fabrication of the individual parts, our welder assembled and welded those parts together to produce the final hydraulic ram bracket…(Read More)
Repair to Ladder and Cage Our team removed the damaged sections and replaced them with new steel. The guys then painted the new sections with a galvanising coating to protect it from corrosion…(Read More)
Boat Mast
by
Boat Mast A boat mast fabricated from stainless steel to hold the radar dome and antenna…(Read More)
Handrail
by
Handrail Installation The team at SWP have fabricated and fitted a handrail. Using steel tube to create the stanchion post and handrail. Welded all together to create the finished product. Final touches included the painting of the rail…(Read More)
Sliding Gate
by
Sliding Gate Liam and Mikey have recently installed a sliding gate at a customers property. This included a support bar and steel track. The gate will have wooden panels fitted at a later date. Steel work fabricated by TheTIG…(Read More)
Mezzanine Floor Earlier in 2018 SWP erected a mezzanine floor for a food production factory. This means the factory would have a massive uplift in capability and output. The steel was cut and welded at the Berwick site, then delivered to the factory. Our team then assembled the mezzanine. Final touches included adding the safety…(Read More)