The job TheTIG has been putting his skills to use again. This time fabricating a stainless steel chute. He first cut all of the steel to size from a 4m x 2m sheet using our guillotine (cutting service available to the trades and public). Next certain edges had to be bent, holes drilled in the…(Read More)
LED Light Casings Here at SWP, we produced a set of LED light casings. The project started with a template provided by the customer. The dimensions were taken and translated into a CAD drawing. The information was sent to the CNC plasma cutter, and parts were cut from a mild steel sheet. Once cut part…(Read More)
Fencing and Gate A new gate and length of fencing installed by our team. The fence posts were cut from plate steel using our CNC plasma cutter. Everything else was fabricated in the workshop…(Read More)
Palisade Security Gate Liam and Mikey have produced a set of palisade security gates. The frames are fabricated and welded together, furthermore the frame work received a couple of coats of paint. This ensures protection from the weather. The next stage saw the adding of the palisade pales. The gate bolt and other parts of…(Read More)
Manhole Cover The Gull has fabricated a new manhole cover and frame work to replace the existing one. The original was in bad shape and had rusted through in areas. The Gull and Cal Dawg then installed the cover on site…(Read More)
Replacement Panels A customer needed a set of van panels fabricated. The original panels were pretty much rusted through and could not be saved. Our team set to work, cutting the steel to size, furthermore the steel was bent into shape using out CNC press brake. Once all of the parts were ready it was…(Read More)
The Job Neil (The God Father) and Liam have recently fabricated a grain conveyor tail end. The galvanised steel was cut to size and the edges were bent using our CNC brake press. This was to form a lip so the conveyor casing could be fixed together. The internal elements were added, further more flanged…(Read More)
The job This project involved fabricating and welding together a diesel fuel tank to replace an old tank. Using our guillotine, the mild steel was cut to size. Once the steel was cut, certain parts of the tank had to be rounded, this was achieved by placing the steel into our break press and bending…(Read More)